Skip to main content

Gluon recovery

Submitted by Erik Wegner on

To boot your OM2P-HS v4 into the recovery environment, follow these steps:

  1. Power off the device
  2. Press and hold the reset button (underneath the case)
  3. Power on the device: the power LED is lit.
  4. As soon as the power LED starts flickering, release the reset button.
  5. Assign a static IP address to your ethernet, e.g. 192.168.1.2/24
  6. Connect to the device: ssh -l root 192.168.1.1

Some possible commands are listet here: https://github.com/freifunk-gluon/gluon/wiki/Commandline-administration